This might be necessary only if you attach the ground level deck to the house. A Canberra timber deck on ground must have a low frame, set at joist level. Selecting the right materials: When you build a deck at ground level, you must use the right type of materials. Depending on the type of look you want to achieve and your requirements, you may choose the material that will go into building a deck on the ground.
Diy step by step article about how to build a deck on the ground. Building a deck on the ground or a floating deck is easy if you use the right tips and plans.
Some deck builders install a layer of gravel or crushed stone beneath the deck to help drain water away. Ground level decks may breed mold without proper ventilation. Make sure the ground slopes away from the house under ground level decks. It is a good idea to space your decking to allow the underside of the deck to breathe.
Place one board in the middle of the deck area, making sure it hangs evenly off each end of the 2x6s. The deck planks are made to have a gap between them, so use a small nail as your spacing guide at each joint. Where the deck plank meets each joist, screw two square-head trim screws 1-1/4 inch from each side of the deck plank (Image 1).
When an outdoor deck is constructed, it is usually supported by posts that extend into the ground. This support becomes necessary when the deck's surface will rise ,
How to build a basic, ground-level deck - B&Q for all your home and garden supplies and advice on all the latest DIY trends
Use a torpedo level to make the surface of each block level and a line level to make all the blocks on the perimeter level with each other. Step 3 Set 2-by-8 pressure-treated boards on the pier blocks to form the perimeter of the deck.
Guide to building low and ground-level decks. This article describes the construction of low and ground-level decks, including questions of deck support, how beams ,